Shop-Vac® 10 Gallon* 6.0 Peak HP** Contractor Portable Wet Dry Vac

Catalog No. - 5873810  Model No. - CH87-600C  

Product Image
Peak HP**

Click Images to Enlarge.

Shop-Vac®Industrial & Contractor Series Wet Dry Vacs

The Shop-Vac® 10 Gallon* Wet / Dry Contractor Vac features a 6.5 Peak HP** motor, onboard tool & cord storage, and a high efficiency filtration system.

Equipped with 20 foot power cord, top carry handle, and removable dolly. Rear blower port converts vacuum to a blower.

Backed by 1 year industrial warranty.

Accessories Included:

  • 12 foot x 1-1/2 inch diameter Lock-On® hose
  • 2 extension wands
  • 14 inch floor nozzle
  • claw utility nozzle
  • crevice tool & adaptor

Filters Included:

  • Ultra-Web® cartridge filter
  • high efficiency collection filter bag
  • foam sleeve (for liquid pickup)

Assembled in the U.S.A. of U.S. and global components.


  • Cord Length: 20 Feet
  • Hose Size: 1.5" Diameter
  • Warranty: 1 Year
  • Lock-On® Hose
  • Hand Held Design
  • Blower Feature
  • Onboard Accessory Storage



  • 12-foot by 1.5-inch diameter Lock-On® hose
  • two 1.5-inch diameter extension wands
  • 14-inch wet/dry floor nozzle
  • crevice tool
  • claw utility nozzle
  • adaptor
  • tool holder


  • Ultra-Web® Cartridge Filter
    (90350 Type X)
  • Foam Sleeve
    (90585 Type R)
  • 10-14 Gallon* High Efficiency Disposable Filter Bag
    (90672 Type I)


Airflow, Max

90 CFM

Sealed Pressure

50 Inches

Electrical Ratings

120V~ 60Hz 11.8 Amps

Peak Air Watts


ASTM tested with 1.5-inch Shop-Vac® diameter hose 

Horsepower Rating

**"Peak Horsepower" (PHP) is a term used in the wet-dry vacuum industry for consumer comparison purposes. It does not denote the operational horsepower of a wet-dry vacuum but rather the horsepower output of a motor, including the motor’s inertial contribution, achieved in laboratory testing. In actual use, Shop-Vac motors do not operate at the peak horsepower shown.

CFM (Cubic Feet Per Minute)

CFM is a measure of the quantity of air moved by the vacuum motor at a particular system load, such as 2-1/2" orifice. Your actual system load is determined by the type, size and length of the hose used, the accessory tool used and the filter system used. A dirty filter system can drastically affect the suction and air flow. The filters need to be cleaned regularly and replaced as necessary to avoid reduced suction and air flow.

SP (Sealed Pressure)

Suction pressure represents how far up a glass tube a vacuum motor will lift a column of water. This function is measured in inches. Maximum suction pressure or sealed water lift is obtained at zero air flow. Suction pressure decreases as air flow increases.

Vacuum Performance

Vacuum performance or air power is the rate of work performed by a vacuum cleaner. Air power is a function of suction and air flow at an operating point. Air power is reduced by dirty filters, leaks and attachments used.